Switches and Lighting Controls, Occupancy Sensors, Adaptive Technology Dual (Ultrasonic and PIR) Ceiling Sensors, 500 Square Feet CoverageWithRelay
MFG #ATD500CRP
Requires Quote
/ Each
HESCO Part Number
HUBATD500CRP
UPC
783585392424
Manufacturer Part Number
ATD500CRP
Manufacturer
Hubbell Wiring Device
Switches and Lighting Controls, Occupancy Sensors, Adaptive Technology Dual (Ultrasonic and PIR) Ceiling Sensors, 500 Square Feet CoverageWithRelay
MFG #ATD500CRP
HESCO Part Number
HUBATD500CRP
UPC
783585392424
Manufacturer Part Number
ATD500CRP
Manufacturer
Hubbell Wiring Device
Requires Quote
/ Each
- Features
- Specifications
- Resources
- Switches and Lighting Controls, Occupancy Sensors, Adaptive Technology Dual (Ultrasonic and PIR) Ceiling Sensors, 500 Square Feet CoverageWithRelay
- Install and Forget" operation. Auto-adjusting adaptive technology eliminates manual adjustments
- Controls - Ambient Light - 1 to 1000 foot candles
- Coverage 500 sq. ft. (180°) with photocell and isolated relay, low voltage sensor
- Controls - Sensitivity - Adaptive 0 to 100%
- lights turning ON when the space is un-occupied. Offer the best performance for most applications
- With Photocell and Relay
- Controls - Time Delay - Test (8 seconds), adaptive 8 to 40 minutes
- Minimize the risk of false triggering
- Electrical - Isolated Relay - Normally open and normally closed terminals available
- Office White ABS enclosure blends with ceiling tile
- Electrical - Power Requirements - 24V DC nominal, 33mA from Hubbell CU series control unit
- Red LED indicates passive infrared detection and Green LED indicates ultrasonic detection
- Environmental - Operating Temperature - 32°F to 104°F (0°C to 40°C) with rate of change not exceeding 20°F (11°C) per hour
- Relay to interface with auxiliary systems such as HVAC
- Environmental - Storage Temperature - -20°F to 150°F (-29°C to 65°C), 0% to 95% non-condensing relative humidity
- Sensing Indicators - Passive Infrared - Red LED
- Sensing Indicators - Ultrasonic - Green LED
Specifications
| Item Type | : | Low voltage Ceiling Sensors |
| Load Capacity | : | Load is a function of the control unit |
| Operating Cycles | : | 6,000 Cycles Minimum |
| Operating Temperature | : | 32 Deg F to 104 Deg F (0 Deg C to 40 Deg C) |
| UPC | : | 783585392424 |
| Height | : | 1.5 in |
| Sensitivity | : | Adaptive 0 to 100% |
| Supply Voltage | : | 24V DC From Control Unit |
- Switches and Lighting Controls, Occupancy Sensors, Adaptive Technology Dual (Ultrasonic and PIR) Ceiling Sensors, 500 Square Feet CoverageWithRelay
- Install and Forget" operation. Auto-adjusting adaptive technology eliminates manual adjustments
- Controls - Ambient Light - 1 to 1000 foot candles
- Coverage 500 sq. ft. (180°) with photocell and isolated relay, low voltage sensor
- Controls - Sensitivity - Adaptive 0 to 100%
- lights turning ON when the space is un-occupied. Offer the best performance for most applications
- With Photocell and Relay
- Controls - Time Delay - Test (8 seconds), adaptive 8 to 40 minutes
- Minimize the risk of false triggering
- Electrical - Isolated Relay - Normally open and normally closed terminals available
- Office White ABS enclosure blends with ceiling tile
- Electrical - Power Requirements - 24V DC nominal, 33mA from Hubbell CU series control unit
- Red LED indicates passive infrared detection and Green LED indicates ultrasonic detection
- Environmental - Operating Temperature - 32°F to 104°F (0°C to 40°C) with rate of change not exceeding 20°F (11°C) per hour
- Relay to interface with auxiliary systems such as HVAC
- Environmental - Storage Temperature - -20°F to 150°F (-29°C to 65°C), 0% to 95% non-condensing relative humidity
- Sensing Indicators - Passive Infrared - Red LED
- Sensing Indicators - Ultrasonic - Green LED
Specifications
Item Type : Low voltage Ceiling Sensors Load Capacity : Load is a function of the control unit Operating Cycles : 6,000 Cycles Minimum Operating Temperature : 32 Deg F to 104 Deg F (0 Deg C to 40 Deg C) UPC : 783585392424 Height : 1.5 in Sensitivity : Adaptive 0 to 100% Supply Voltage : 24V DC From Control Unit - Brochures
Brochure - Healthcare Application GuideBrochure - H-MOSS Sensors Troubleshooting GuideBrochure - Healthcare Application GuideBrochure
Sales DrawingsWIRING_M7781_SALESDRAWING
SpecificationsWiring ATD500CRP Specification Sheet