Diagonal Cutting Pliers Angled Head
MFG #200048EINS
Requires Quote
 / Each
HESCO Part Number
KLE200048EINS
UPC
092644720086
Manufacturer Part Number
200048EINS
Manufacturer
Klein Tools
Diagonal Cutting Pliers Angled Head
MFG #200048EINS
HESCO Part Number
KLE200048EINS
UPC
092644720086
Manufacturer Part Number
200048EINS
Manufacturer
Klein Tools
Requires Quote
 / Each
- Features
- Specifications
- Resources
- Whenever possible, always de-energize lines and equipment prior to working on or around them. Klein insulated tools are designed only to reduce the chance of injury where the tool may make contact with an energized source.
- 1000 V Rated for safety on the job. VDE Certified
- Only use tools that are marked with the official international 1000-volt rating symbol shown below, if there is any chance that the tools will make contact with an energized source.
- Unique three-part insulation with white underlayer provides a warning sign that insulation may be compromised
- Always inspect your tools before use.
- Cuts ACSR, screws, nails and most hardened wire. Induction hardened for long life
- Always wear approved eye protection.
- Multi-color, sleek design with small thumbguards for ease of handling and easy storage in your toolbelt
- Do NOT touch uninsulated portion of the tool or any conductive object when either might contact an energized source.
- Hot-riveted joint for smooth action and no handle wobble
- Keep tool clean, dry and free of any surface contaminants.
- Durable, molded insulation meets or exceeds ASTM F1505 and IEC 60900 standards for insulated tools
- Destroy tool if the insulation is damaged in any way.
- WARNING! Cancer and reproductive harm. See www.P65Warnings.ca.gov for more information.
Specs
| Nose Type | :Â Â | Angled |
| Overall Length | :Â Â | 8-1/4'' (209.6 mm) |
| Jaw Length | :Â Â | 13/16'' (20.6 mm) |
| Jaw Width | :Â Â | 1-3/16'' (30.2 mm) |
| Jaw Thickness | :Â Â | 7/16'' (11.1 mm) |
| Cutting Knives | :Â Â | Standard |
| Weight | :Â Â | 0.70 lb (0.32 kg) |
| Application | :Â Â | ACSR, Screws, Nails and Most Hardened Wire |
| Finish | :Â Â | Combination Polished Black-Oxide |
| Handle Color | :Â Â | Orange/Gray |
| Handle Length | :Â Â | 6-3/4'' (171.5 mm) |
| Handle Material | :Â Â | High-Dielectric Plastic |
| Handle Type | :Â Â | Slim |
| Head Type | :Â Â | Fixed |
| Insulated | :Â Â | Yes |
| Knife Length | :Â Â | Standard |
| Material | :Â Â | Induction Hardened Steel |
| Special Features | :Â Â | Flame Retardant and Impact Resistant Handle |
| Standard | :Â Â | IEC 60900 and ASTM F1505 |
| Type | :Â Â | High-Leverage |
Accessories | ||
| TT1 | :Â Â | Tool Tether, 10 lbs Max |
| TT2 | :Â Â | Triple-Locking Tool Tether, 15 lbs Max |
- Whenever possible, always de-energize lines and equipment prior to working on or around them. Klein insulated tools are designed only to reduce the chance of injury where the tool may make contact with an energized source.
- 1000 V Rated for safety on the job. VDE Certified
- Only use tools that are marked with the official international 1000-volt rating symbol shown below, if there is any chance that the tools will make contact with an energized source.
- Unique three-part insulation with white underlayer provides a warning sign that insulation may be compromised
- Always inspect your tools before use.
- Cuts ACSR, screws, nails and most hardened wire. Induction hardened for long life
- Always wear approved eye protection.
- Multi-color, sleek design with small thumbguards for ease of handling and easy storage in your toolbelt
- Do NOT touch uninsulated portion of the tool or any conductive object when either might contact an energized source.
- Hot-riveted joint for smooth action and no handle wobble
- Keep tool clean, dry and free of any surface contaminants.
- Durable, molded insulation meets or exceeds ASTM F1505 and IEC 60900 standards for insulated tools
- Destroy tool if the insulation is damaged in any way.
- WARNING! Cancer and reproductive harm. See www.P65Warnings.ca.gov for more information.
Specs
Nose Type :Â Â Angled Overall Length :Â Â 8-1/4'' (209.6 mm) Jaw Length :Â Â 13/16'' (20.6 mm) Jaw Width :Â Â 1-3/16'' (30.2 mm) Jaw Thickness :Â Â 7/16'' (11.1 mm) Cutting Knives :Â Â Standard Weight :Â Â 0.70 lb (0.32 kg) Application :Â Â ACSR, Screws, Nails and Most Hardened Wire Finish :Â Â Combination Polished Black-Oxide Handle Color :Â Â Orange/Gray Handle Length :Â Â 6-3/4'' (171.5 mm) Handle Material :Â Â High-Dielectric Plastic Handle Type :Â Â Slim Head Type :Â Â Fixed Insulated :Â Â Yes Knife Length :Â Â Standard Material :Â Â Induction Hardened Steel Special Features :Â Â Flame Retardant and Impact Resistant Handle Standard :Â Â IEC 60900 and ASTM F1505 Type :Â Â High-Leverage Accessories
TT1 :Â Â Tool Tether, 10 lbs Max TT2 :Â Â Triple-Locking Tool Tether, 15 lbs Max - Downloads
BrochureBrochureInstructions