Powermonitor 5000 Base Quality Meter (1426-M5E-CNT)
MFG #1426-M5E-CNT
$3,667.89 / E
EACH
EACH
Product Description:
Bulletin 1426 PowerMonitor 5000 M5 , Base Power Quality Meter, ControlNet Comm Port
HESCO Part Number
AB1426M5ECNT
UPC
612598886234
Manufacturer Part Number
1426-M5E-CNT
Manufacturer
Allen-Bradley
Powermonitor 5000 Base Quality Meter (1426-M5E-CNT)
MFG #1426-M5E-CNT
Product Description:
Bulletin 1426 PowerMonitor 5000 M5 , Base Power Quality Meter, ControlNet Comm Port
HESCO Part Number
AB1426M5ECNT
UPC
612598886234
Manufacturer Part Number
1426-M5E-CNT
Manufacturer
Allen-Bradley
$3,667.89 / E
EACH
EACH
- Features
- Specifications
- Resources
- Australian RCM
- 0.20%
- Alarm
- Power Management/Quality m application
- ControlNet and EtherNet/IP communications
- 40-75Hz frequency rating
- Webpage interface
- 600VLL AC metering voltage
- 4 Digital Relays output
General Features
| Accuracy | : | 0.20% |
| Alarm | : | true |
| Application | : | Power Management/Quality m |
| Communications | : | ControlNet and EtherNet/IP |
| Frequency Rating | : | 40-75Hz |
| Interface | : | Webpage |
| Metering Voltage | : | 600VLL AC |
| Output | : | 4 Digital Relays |
| CIP energy object | : | true |
| Configurable via webpage | : | true |
| Configuration lock switch | : | When enabled, this switch helps prevent changes in configuration that can affect revenue accuracy |
| Demand functions | : | ANSI C12.20 -2010 class 0.2 clause 5.5.4. EN 62053-22 -2003 class 0.2 accuracy clause 8 |
| Device status indicators | : | Device status - OFF: No control power - Flashing GREEN/RED: Self-test - Flashing GREEN: Power monitor has not been configured - GREEN: Power monitor is running - Flashing RED: Power monitor has detected a recoverable minor fault - RED: Power monitor has detected a non-recoverable major fault |
| Energy functions | : | ANSI C12.20 -2010 class 0.2 clause 5.5.4. EN 62053-22 -2003 class 0.2 accuracy clause 8 |
| K-factor | : | true |
| Metering update rates | : | One update per line cycle, 1024 sAles per cycle per channel |
| Network demand synchronization | : | true |
| Network status indicators | : | Network status (Native Ethernet port) - OFF: No control power - Flashing GREEN/RED: Self-test - Flashing GREEN: No CIP connection - Solid GREEN: CIP connection established - Flashing RED: CIP connection timed out - Solid RED: Duplicate IP address detected |
| Network time synchronization | : | true |
| Power | : | Power status - OFF: no control power - GREEN: control power is present |
| Power functions | : | ANSI C12.20 -2010 class 0.2 clause 5.5.4. EN 62053-22 -2003 class 0.2 accuracy clause 8 |
| Revenue accuracy | : | true |
| Sag and swell detection | : | true |
| Security | : | true |
| Setpoint programming | : | true |
| Status inputs | : | true |
| USB device port | : | The USB device port is a USB Mini-B receptacle that accepts standard USB Mini-B plugs, for connection to a host device, such as a notebook computer |
| USB host port | : | USB standard A receptacle. Not used in this model |
| Virtual wiring correction | : | true |
| Web page | : | true |
| Wiring diagnostics | : | true |
Inputs Outputs Io | ||
| Control relay | : | ANSI C37.90 trip duty: 2005 |
| Control voltage | : | 22.8.25.2V DC @ 24V DC |
| KYZ output | : | Solid-state KYZ: 80mA @ 240V AC/V DC |
Power Electrical Characteristics | ||
| Ampere meter | : | true |
| Blind power meter | : | true |
| Frequency meter | : | true |
| Pulse counter | : | true |
| Voltmeter | : | true |
Communication Interfaces | ||
| ControlNet | : | true |
| EtherNet/IP | : | true |
Measurement Parameters | ||
| Crest factor | : | V-V, V-N, and I, per phase: Yes |
| Current consumption | : | true |
| Current per phase and total | : | true |
| Current unbalance | : | true |
| Demand, amps | : | true |
| Demand power factor | : | true |
| Frequency | : | Nominal: 60 Hz |
| Projected amps demand | : | true |
| Projected kVA demand | : | true |
| Projected kVAR demand | : | true |
| Projected kW demand | : | true |
| Symmetrical component analysis | : | true |
| Voltage, L-L and L-N | : | true |
| Voltage unbalance | : | true |
Environmental Operating Conditions | ||
| Altitude | : | 2000 m, max |
| Dielectric withstand | : | UL61010, EN61010 |
| Humidity | : | 5.95% noncondensing |
| Installation location | : | Indoor use only |
| Operating temperature | : | -20 to 70 °C |
| Shock | : | 50 G, nonoperating |
| Storage temperature | : | -40 to 85 °C |
| Vibration | : | 2 G |
Relays Control Outputs | ||
| Break values | : | (Inductive load) 3A @ 120V AC, 50/60 Hz, RMS, maximum |
| IC rating class | : | UL 508, CSA 22.2 @ DC: Q300 |
| Load switching | : | 100mA @ 5V AC, 50/60 Hz, RMS, minimum |
| Make values | : | (Inductive load) 30A @ 120V AC, 50/60 Hz, RMS, maximum |
| Motor load switching | : | 1/3HP @ 125V AC, 50/60 Hz, RMS, maximum |
| Resistive load switching | : | 10A @ 24V DC, maximum |
Overview | ||
| Standard Warranty Duration | : | 1 year |
Specifications | ||
| Build America, Buy America | : | No |
| Repair Options Available | : | No |
| Apparent energy | : | true |
| Apparent power demand | : | true |
| Apparent power | : | true |
| Depth | : | 178 mm |
| Height | : | 132 mm |
| Pulse (digital) output | : | true |
| Reactive energy | : | true |
| Reactive power demand | : | true |
| Reactive power | : | true |
| Real energy | : | true |
| Real power demand | : | true |
| Real power | : | true |
| Total harmonic distortion | : | true |
| Width | : | 185 mm |
| Country of Origin | : | Malaysia |
Inputoutput Specifications | ||
| Control power | : | 12VA @ 24V DC |
Data Handling | ||
| Alarm log | : | true |
| Data log | : | true |
| Energy log | : | true |
| Event log | : | true |
| Load factor log | : | true |
| Minimum/maximum log | : | true |
| Setpoint log | : | true |
| Time of use log | : | true |
- Australian RCM
- 0.20%
- Alarm
- Power Management/Quality m application
- ControlNet and EtherNet/IP communications
- 40-75Hz frequency rating
- Webpage interface
- 600VLL AC metering voltage
- 4 Digital Relays output
General Features
Accuracy : 0.20% Alarm : true Application : Power Management/Quality m Communications : ControlNet and EtherNet/IP Frequency Rating : 40-75Hz Interface : Webpage Metering Voltage : 600VLL AC Output : 4 Digital Relays CIP energy object : true Configurable via webpage : true Configuration lock switch : When enabled, this switch helps prevent changes in configuration that can affect revenue accuracy Demand functions : ANSI C12.20 -2010 class 0.2 clause 5.5.4. EN 62053-22 -2003 class 0.2 accuracy clause 8 Device status indicators : Device status - OFF: No control power - Flashing GREEN/RED: Self-test - Flashing GREEN: Power monitor has not been configured - GREEN: Power monitor is running - Flashing RED: Power monitor has detected a recoverable minor fault - RED: Power monitor has detected a non-recoverable major fault Energy functions : ANSI C12.20 -2010 class 0.2 clause 5.5.4. EN 62053-22 -2003 class 0.2 accuracy clause 8 K-factor : true Metering update rates : One update per line cycle, 1024 sAles per cycle per channel Network demand synchronization : true Network status indicators : Network status (Native Ethernet port) - OFF: No control power - Flashing GREEN/RED: Self-test - Flashing GREEN: No CIP connection - Solid GREEN: CIP connection established - Flashing RED: CIP connection timed out - Solid RED: Duplicate IP address detected Network time synchronization : true Power : Power status - OFF: no control power - GREEN: control power is present Power functions : ANSI C12.20 -2010 class 0.2 clause 5.5.4. EN 62053-22 -2003 class 0.2 accuracy clause 8 Revenue accuracy : true Sag and swell detection : true Security : true Setpoint programming : true Status inputs : true USB device port : The USB device port is a USB Mini-B receptacle that accepts standard USB Mini-B plugs, for connection to a host device, such as a notebook computer USB host port : USB standard A receptacle. Not used in this model Virtual wiring correction : true Web page : true Wiring diagnostics : true Inputs Outputs Io
Control relay : ANSI C37.90 trip duty: 2005 Control voltage : 22.8.25.2V DC @ 24V DC KYZ output : Solid-state KYZ: 80mA @ 240V AC/V DC Power Electrical Characteristics
Ampere meter : true Blind power meter : true Frequency meter : true Pulse counter : true Voltmeter : true Communication Interfaces
ControlNet : true EtherNet/IP : true Measurement Parameters
Crest factor : V-V, V-N, and I, per phase: Yes Current consumption : true Current per phase and total : true Current unbalance : true Demand, amps : true Demand power factor : true Frequency : Nominal: 60 Hz Projected amps demand : true Projected kVA demand : true Projected kVAR demand : true Projected kW demand : true Symmetrical component analysis : true Voltage, L-L and L-N : true Voltage unbalance : true Environmental Operating Conditions
Altitude : 2000 m, max Dielectric withstand : UL61010, EN61010 Humidity : 5.95% noncondensing Installation location : Indoor use only Operating temperature : -20 to 70 °C Shock : 50 G, nonoperating Storage temperature : -40 to 85 °C Vibration : 2 G Relays Control Outputs
Break values : (Inductive load) 3A @ 120V AC, 50/60 Hz, RMS, maximum IC rating class : UL 508, CSA 22.2 @ DC: Q300 Load switching : 100mA @ 5V AC, 50/60 Hz, RMS, minimum Make values : (Inductive load) 30A @ 120V AC, 50/60 Hz, RMS, maximum Motor load switching : 1/3HP @ 125V AC, 50/60 Hz, RMS, maximum Resistive load switching : 10A @ 24V DC, maximum Overview
Standard Warranty Duration : 1 year Specifications
Build America, Buy America : No Repair Options Available : No Apparent energy : true Apparent power demand : true Apparent power : true Depth : 178 mm Height : 132 mm Pulse (digital) output : true Reactive energy : true Reactive power demand : true Reactive power : true Real energy : true Real power demand : true Real power : true Total harmonic distortion : true Width : 185 mm Country of Origin : Malaysia Inputoutput Specifications
Control power : 12VA @ 24V DC Data Handling
Alarm log : true Data log : true Energy log : true Event log : true Load factor log : true Minimum/maximum log : true Setpoint log : true Time of use log : true - Downloads
Installation InstructionsProduct ProfileUser Manual