ProLine G2 19-Inch Rack Angles, Tap Hole, 1400mm, Conductive, Steel
MFG #P2RA19T14
$232.00Â /Â E
EACH
EACH
HESCO Part Number
HFP2RA19T14
UPC
783510326227
Manufacturer Part Number
P2RA19T14
Manufacturer
Hoffman
ProLine G2 19-Inch Rack Angles, Tap Hole, 1400mm, Conductive, Steel
MFG #P2RA19T14
HESCO Part Number
HFP2RA19T14
UPC
783510326227
Manufacturer Part Number
P2RA19T14
Manufacturer
Hoffman
$232.00Â /Â E
EACH
EACH
- Features
- Specifications
- Resources
- Furnished in pairs
- Can be mounted directly to the frame, or at variable depths using Adjustable Rack-Mounting Rails or Grid Straps; when mounted to the frame there is 44mm between the door opening and the Rack Angle mounting surface
- Single-bay Frames: in a 600-mm wide frame, Rack Angles can be mounted in-line with the frame; in an 800-mm wide frame, Adjustable Rack-Mounting Rails or Frame Reducing Brackets are required (sold separately) to achieve the 19-inch rack spacing
- Double-Bay Frames: in a 1200-mm wide frame, Center Uprights must be used to create a mounting surface in the center of the enclosure for either bay; in a 1600-mm frame, Center Uprights are again required in addition to Frame Reducing Brackets or Adjustable Rack-Mounting Rails to achieve the 19-inch rack spacing
- Tapped-Hole Rack Angles accommodate 10-32 screws for equipment mounting
- Square-Hole Rack Angles accept both metric and English cage nuts and screws: most commonly M5, M6, and 10-32 screws
- Optional Shelves, Drawers, and Guides require two sets of Rack Angles to secure within the frame
- All mounting hardware for Rack Angle installation into the frame is included; mounting hardware for securing rack-mount equipment/accessories to the Rack Angles is either supplied with the item or purchased separately
- Tapped Rack Angles are constructed from 12 gauge (2.5 mm) conductive steel, while Square-Hole Rack Angles are from 14 gauge (1.75 mm) conductive steel
- Load rating of 20 lbs (9.1 kg) per rack unit for equipment under 20-inches (508 mm) in depth; All equipment over 20-inches in depth requires rear rack angles for support
Specifications
| BABA | :Â Â | Contact Manufacturer |
| Height (H) | :Â Â | 1,309 |
| Width (W) | :Â Â | 65 |
| Depth (D) | :Â Â | 48 |
| Product Family | :Â Â | ProLine |
| Material | :Â Â | Mild Steel |
| Hole Type | :Â Â | Tapped |
| Rack Units | :Â Â | 29 |
| Weight | :Â Â | 16 |
| Finish | :Â Â | Plated |
| Thickness (T) | :Â Â | 2.66 |
| Works With | :Â Â | NEMA |
| Sub Brand | :Â Â | ProLine |
Downloads
Spec Sheet
Certificate
Certificate - CE-UKCA-00163_Proline-G2 - NAM-US
Data Sheet
Data Sheet - Spec-01200 - NAM-CA
Instruction Manual
Instruction Manual - 89161823 - NAM-US
Spec SheetCertificate
Certificate - CE-UKCA-00163_Proline-G2 - NAM-USData Sheet
Data Sheet - Spec-01200 - NAM-CAInstruction Manual
Instruction Manual - 89161823 - NAM-US- Furnished in pairs
- Can be mounted directly to the frame, or at variable depths using Adjustable Rack-Mounting Rails or Grid Straps; when mounted to the frame there is 44mm between the door opening and the Rack Angle mounting surface
- Single-bay Frames: in a 600-mm wide frame, Rack Angles can be mounted in-line with the frame; in an 800-mm wide frame, Adjustable Rack-Mounting Rails or Frame Reducing Brackets are required (sold separately) to achieve the 19-inch rack spacing
- Double-Bay Frames: in a 1200-mm wide frame, Center Uprights must be used to create a mounting surface in the center of the enclosure for either bay; in a 1600-mm frame, Center Uprights are again required in addition to Frame Reducing Brackets or Adjustable Rack-Mounting Rails to achieve the 19-inch rack spacing
- Tapped-Hole Rack Angles accommodate 10-32 screws for equipment mounting
- Square-Hole Rack Angles accept both metric and English cage nuts and screws: most commonly M5, M6, and 10-32 screws
- Optional Shelves, Drawers, and Guides require two sets of Rack Angles to secure within the frame
- All mounting hardware for Rack Angle installation into the frame is included; mounting hardware for securing rack-mount equipment/accessories to the Rack Angles is either supplied with the item or purchased separately
- Tapped Rack Angles are constructed from 12 gauge (2.5 mm) conductive steel, while Square-Hole Rack Angles are from 14 gauge (1.75 mm) conductive steel
- Load rating of 20 lbs (9.1 kg) per rack unit for equipment under 20-inches (508 mm) in depth; All equipment over 20-inches in depth requires rear rack angles for support
Specifications
BABA :Â Â Contact Manufacturer Height (H) :Â Â 1,309 Width (W) :Â Â 65 Depth (D) :Â Â 48 Product Family :Â Â ProLine Material :Â Â Mild Steel Hole Type :Â Â Tapped Rack Units :Â Â 29 Weight :Â Â 16 Finish :Â Â Plated Thickness (T) :Â Â 2.66 Works With :Â Â NEMA Sub Brand :Â Â ProLine - DownloadsSpec Sheet
CertificateCertificate - CE-UKCA-00163_Proline-G2 - NAM-US
Data SheetData Sheet - Spec-01200 - NAM-CA
Instruction ManualInstruction Manual - 89161823 - NAM-US