Appleton Group
Appleton™ Contender™ CPS Factory Sealed 20 Amp Pin and Sleeve Receptacles - PN CPS152102GFI
MFG #CPS152102GFI
$1,842.79 / E
Each
Each
Product Description:
Contender™ CPS Factory Sealed 20 Amp Pin and Sleeve Receptacles provide explosionproof protection for stationary or portable equipment in hazardous, damp or corrosive locations. It features delayed action construction; to operate, insert plug to first stop, move Slide-Lok™ slide to the right and push plug fully forward to energize. The Contender CPS meets all UL and CSA requirements for ground fault protection in hazardous locations when the GFCI cover is used.
HESCO Part Number
APPCPS152102GFI
Manufacturer Part Number
CPS152102GFI
Manufacturer
Appleton Group
Appleton Group
Appleton™ Contender™ CPS Factory Sealed 20 Amp Pin and Sleeve Receptacles - PN CPS152102GFI
MFG #CPS152102GFI
Product Description:
Contender™ CPS Factory Sealed 20 Amp Pin and Sleeve Receptacles provide explosionproof protection for stationary or portable equipment in hazardous, damp or corrosive locations. It features delayed action construction; to operate, insert plug to first stop, move Slide-Lok™ slide to the right and push plug fully forward to energize. The Contender CPS meets all UL and CSA requirements for ground fault protection in hazardous locations when the GFCI cover is used.
HESCO Part Number
APPCPS152102GFI
Manufacturer Part Number
CPS152102GFI
Manufacturer
Appleton Group
$1,842.79 / E
Each
Each
- Features
- Specifications
- Resources
- Covers are UL Classified for use with Crouse-Hinds™ CPP516 plug
- Plug mechanical cable clamps prevent strain on cables – they meet or exceed UL strain relief pull-out requirements
- Insulators provide superior dielectric and mechanical strength and lowest arc tracking
- Delayed action construction: insert plug partially rotate slide on front of receptacle and insert plug fully
- Factory sealed: external seals not required
- Plug and receptacles are supplied with pressure terminal connectors
Specifications
| Hazardous Area Classification | : | Class I, Division 1 and 2, Groups C, D |
| Amperage | : | 20 |
| Voltage | : | 125-250 Vac or 18 Vdc |
| Number of Poles | : | 3 |
| Number of Wires | : | 2 |
| Horsepower Ratings | : | 1 |
| Plug Cable Diameter | : | .538 – .639 |
| Mounting Box Entries | : | Dead-End or Feed-Thru |
| Materials and Finishes | : | Receptacle cover and CPP plug is copperfree (4/10 of 1% max.) aluminum with epoxy powder coat. Mounting box is malleable iron with triple-coat. Insulating blocks are fiberglass reinforced polyester. |
- Covers are UL Classified for use with Crouse-Hinds™ CPP516 plug
- Plug mechanical cable clamps prevent strain on cables – they meet or exceed UL strain relief pull-out requirements
- Insulators provide superior dielectric and mechanical strength and lowest arc tracking
- Delayed action construction: insert plug partially rotate slide on front of receptacle and insert plug fully
- Factory sealed: external seals not required
- Plug and receptacles are supplied with pressure terminal connectors
Specifications
Hazardous Area Classification : Class I, Division 1 and 2, Groups C, D Amperage : 20 Voltage : 125-250 Vac or 18 Vdc Number of Poles : 3 Number of Wires : 2 Horsepower Ratings : 1 Plug Cable Diameter : .538 – .639 Mounting Box Entries : Dead-End or Feed-Thru Materials and Finishes : Receptacle cover and CPP plug is copperfree (4/10 of 1% max.) aluminum with epoxy powder coat. Mounting box is malleable iron with triple-coat. Insulating blocks are fiberglass reinforced polyester. - Catalogs
Catalog: Contender CPS Factory Sealed 20 Amp Pin and Sleeve Receptacles | Appleton
Manuals & GuidesInstruction Sheet: Contender CPS Factory Sealed 20 Amp Pin and Sleeve Receptacles, 330146 | Appleton