Appleton™ U-Line™ Contender™ Factory Sealed 20 Amp Plugs and Receptacles - PN ENRC11201
MFG #ENRC11201
$485.64 / E
Each
Each
Product Description:
U-Line™ Contender™ Factory Sealed 20 Amp Plugs and Receptacles feature a dead front design making them ideal for use with electrical equipment in hazardous locations. The neoprene gasket in the throat of the receptacle seals against the plug or the spring-loaded cover to seal out water, dust and corrosive compounds. Although U-Line plugs can be used with ordinary receptacles, U-Line receptacles are designed so that they can't be energized by an ordinary plug.
HESCO Part Number
APPENRC11201
Manufacturer Part Number
ENRC11201
Manufacturer
Appleton Group
Appleton™ U-Line™ Contender™ Factory Sealed 20 Amp Plugs and Receptacles - PN ENRC11201
MFG #ENRC11201
Product Description:
U-Line™ Contender™ Factory Sealed 20 Amp Plugs and Receptacles feature a dead front design making them ideal for use with electrical equipment in hazardous locations. The neoprene gasket in the throat of the receptacle seals against the plug or the spring-loaded cover to seal out water, dust and corrosive compounds. Although U-Line plugs can be used with ordinary receptacles, U-Line receptacles are designed so that they can't be energized by an ordinary plug.
HESCO Part Number
APPENRC11201
Manufacturer Part Number
ENRC11201
Manufacturer
Appleton Group
$485.64 / E
Each
Each
- Features
- Specifications
- Resources
- Dead front design: receptacle is not energized until plug is fully inserted and switch is engaged
- ECP plug fits any standard non-explosionproof receptacle (NEMA 5-20R, or 6-20R) as well as U-Line explosionproof receptacles
- Insulators provide superior dielectric and mechanical strength and lowest arc tracking
- Ground fault circuit interrupting cover and receptacle combinations available
- Covers are UL Listed when used with Contender™ Series mounting boxes, and UL Classified when used with Crouse-Hinds™ EDS™ series mounting boxes
- Intermatable with competitor's plugs of like configurations
Specifications
| Hazardous Area Classification | : | Class I, Groups C, D; Class I, Division 2, Group B; Class I, Zone 1, Group IIB; Class I, Zone 2, Group IIB + H2; Class II, Groups F, G; Class III; NEMA 3RX, 7CD, 9FG |
| Amperage | : | 20 |
| Voltage | : | 125 Vac or 250 Vac |
| Number of Poles | : | 3 |
| Number of Wires | : | 2 |
| Plug Cable Diameter | : | .538 – .639 |
| Mounting Box Entries | : | Dead-End or Feed-Thru |
| Malleable Iron Material and Finish | : | Mounting boxes are malleable iron with a triple coat finish of (1) zinc electroplate (2) chromate and (3) epoxy powder coat |
| Aluminum Material and Finish | : | Standard receptacle covers and (optional aluminum mounting boxes) are copperfree (4/10 of 1% max.) aluminum with epoxy powder coat |
| Insulator Block Material | : | Glass-filled reinforced polyester |
Manuals & Guides
Instruction Sheet: ECP and NCP Plugs, 330062 | Appleton
Instruction Sheet: ECP and NCP Plugs, 330100
Instruction Sheet: U-Line Contender and U-Line Factory Contender Factory Sealed 20 Amp Plugs and Receptacles, 330062-1 | Appleton
Brochures
Product Guide: Appleton U-Line Interchanger 15 and 20 Amp Plugs | Appleton
Catalogs
Catalog: U-Line Contender Factory Sealed 20 Amp Plugs and Receptacles | Appleton
Instruction Sheet: ECP and NCP Plugs, 330062 | AppletonInstruction Sheet: ECP and NCP Plugs, 330100Instruction Sheet: U-Line Contender and U-Line Factory Contender Factory Sealed 20 Amp Plugs and Receptacles, 330062-1 | AppletonBrochures
Product Guide: Appleton U-Line Interchanger 15 and 20 Amp Plugs | AppletonCatalogs
Catalog: U-Line Contender Factory Sealed 20 Amp Plugs and Receptacles | Appleton- Dead front design: receptacle is not energized until plug is fully inserted and switch is engaged
- ECP plug fits any standard non-explosionproof receptacle (NEMA 5-20R, or 6-20R) as well as U-Line explosionproof receptacles
- Insulators provide superior dielectric and mechanical strength and lowest arc tracking
- Ground fault circuit interrupting cover and receptacle combinations available
- Covers are UL Listed when used with Contender™ Series mounting boxes, and UL Classified when used with Crouse-Hinds™ EDS™ series mounting boxes
- Intermatable with competitor's plugs of like configurations
Specifications
Hazardous Area Classification : Class I, Groups C, D; Class I, Division 2, Group B; Class I, Zone 1, Group IIB; Class I, Zone 2, Group IIB + H2; Class II, Groups F, G; Class III; NEMA 3RX, 7CD, 9FG Amperage : 20 Voltage : 125 Vac or 250 Vac Number of Poles : 3 Number of Wires : 2 Plug Cable Diameter : .538 – .639 Mounting Box Entries : Dead-End or Feed-Thru Malleable Iron Material and Finish : Mounting boxes are malleable iron with a triple coat finish of (1) zinc electroplate (2) chromate and (3) epoxy powder coat Aluminum Material and Finish : Standard receptacle covers and (optional aluminum mounting boxes) are copperfree (4/10 of 1% max.) aluminum with epoxy powder coat Insulator Block Material : Glass-filled reinforced polyester - Manuals & GuidesInstruction Sheet: ECP and NCP Plugs, 330062 | AppletonInstruction Sheet: ECP and NCP Plugs, 330100Instruction Sheet: U-Line Contender and U-Line Factory Contender Factory Sealed 20 Amp Plugs and Receptacles, 330062-1 | Appleton
BrochuresProduct Guide: Appleton U-Line Interchanger 15 and 20 Amp Plugs | Appleton
CatalogsCatalog: U-Line Contender Factory Sealed 20 Amp Plugs and Receptacles | Appleton