Chicago Grip Hot-Line 0.31 to 0.53-Inch
MFG #S1656-30H
Requires Quote
 / EACH
Product Description:
The Klein S1656-30H Chicago Grip-with Hot-Line Latch for Bare Conductors is for both bare and insulated conductors. The Klein S1656-30H Chicago Grip-with Hot-Line Latch for Bare Conductors may be placed on wire with hot-line stick. When stick is removed, latch closes automatically to guard against grip accidentally disengaging from wire.
HESCO Part Number
KLES165630H
UPC
092644471094
Manufacturer Part Number
S1656-30H
Manufacturer
Klein Tools
Chicago Grip Hot-Line 0.31 to 0.53-Inch
MFG #S1656-30H
Product Description:
The Klein S1656-30H Chicago Grip-with Hot-Line Latch for Bare Conductors is for both bare and insulated conductors. The Klein S1656-30H Chicago Grip-with Hot-Line Latch for Bare Conductors may be placed on wire with hot-line stick. When stick is removed, latch closes automatically to guard against grip accidentally disengaging from wire.
HESCO Part Number
KLES165630H
UPC
092644471094
Manufacturer Part Number
S1656-30H
Manufacturer
Klein Tools
Requires Quote
 / EACH
- Features
- Specifications
- Resources
- Chicago Grip-with Hot-Line Latch for Bare Conductors has round inside-jaw contour
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
- Jaw length: 4-7/8-Inch
- When used on/near energized lines, ground, insulate, or isolate grip before pulling.
- Maximum safe load of 4,500 pounds
- Do not exceed rated capacity.
- Standard hot-line grips are not supplied with springs or lock-open features
- Always match proper size and type of grip to application.
- Made in USA
- Grips are to be used for temporary installation, not for permanent anchorage.
- Klein offers a lifetime warranty on material defects and workmanship for the normal life of the product
Specifications
| Application | :Â Â | Wire Pulling |
| Material | :Â Â | Steel |
| Cable Diameter | :Â Â | 0.1" to 0.53" (7.87 to 13.46 mm) |
| Jaw Type | :Â Â | Round |
| Cable Type | :Â Â | Copper, ACSR, AAC |
| Type | :Â Â | Chicago Grip |
| Locking Handle | :Â Â | Yes |
| Hot Latch | :Â Â | Yes |
| Spring | :Â Â | Yes |
| Swing Latch | :Â Â | No |
| Teeth Type | :Â Â | Smooth |
| Weight (kg) | :Â Â | 1.8 |
| Jaw Length (cm) | :Â Â | 12.1 |
| Maximum Safe Load (kg) | :Â Â | 2041.2 |
| Jaw Length (Inch) | :Â Â | 4.75 |
| Maximum Safe Load (lb) | :Â Â | 4500 |
| Weight (lb) | :Â Â | 4 |
| Weight | :Â Â | 4.0000 lbs |
- Chicago Grip-with Hot-Line Latch for Bare Conductors has round inside-jaw contour
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
- Jaw length: 4-7/8-Inch
- When used on/near energized lines, ground, insulate, or isolate grip before pulling.
- Maximum safe load of 4,500 pounds
- Do not exceed rated capacity.
- Standard hot-line grips are not supplied with springs or lock-open features
- Always match proper size and type of grip to application.
- Made in USA
- Grips are to be used for temporary installation, not for permanent anchorage.
- Klein offers a lifetime warranty on material defects and workmanship for the normal life of the product
Specifications
Application :Â Â Wire Pulling Material :Â Â Steel Cable Diameter :Â Â 0.1" to 0.53" (7.87 to 13.46 mm) Jaw Type :Â Â Round Cable Type :Â Â Copper, ACSR, AAC Type :Â Â Chicago Grip Locking Handle :Â Â Yes Hot Latch :Â Â Yes Spring :Â Â Yes Swing Latch :Â Â No Teeth Type :Â Â Smooth Weight (kg) :Â Â 1.8 Jaw Length (cm) :Â Â 12.1 Maximum Safe Load (kg) :Â Â 2041.2 Jaw Length (Inch) :Â Â 4.75 Maximum Safe Load (lb) :Â Â 4500 Weight (lb) :Â Â 4 Weight :Â Â 4.0000 lbs - Downloads
Spec Sheet
InstructionsGrip_Instructions.pdfGrip_Maintenance_Guide_139168ART.pdf