Chicago Grip Hot-Line 0.31 to 0.53-Inch
MFG #S1656-30H
Requires Quote
 / EACH
Product Description:
The Klein S1656-30H Chicago Grip-with Hot-Line Latch for Bare Conductors is for both bare and insulated conductors. The Klein S1656-30H Chicago Grip-with Hot-Line Latch for Bare Conductors may be placed on wire with hot-line stick. When stick is removed, latch closes automatically to guard against grip accidentally disengaging from wire.
HESCO Part Number
KLES165630H
UPC
092644471094
Manufacturer Part Number
S1656-30H
Manufacturer
Klein Tools
Chicago Grip Hot-Line 0.31 to 0.53-Inch
MFG #S1656-30H
Product Description:
The Klein S1656-30H Chicago Grip-with Hot-Line Latch for Bare Conductors is for both bare and insulated conductors. The Klein S1656-30H Chicago Grip-with Hot-Line Latch for Bare Conductors may be placed on wire with hot-line stick. When stick is removed, latch closes automatically to guard against grip accidentally disengaging from wire.
HESCO Part Number
KLES165630H
UPC
092644471094
Manufacturer Part Number
S1656-30H
Manufacturer
Klein Tools
Requires Quote
 / EACH
- Features
- Specifications
- Resources
- Chicago Grip-with Hot-Line Latch for Bare Conductors has round inside-jaw contour
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
- Jaw length: 4-7/8-Inch
- When used on/near energized lines, ground, insulate, or isolate grip before pulling.
- Maximum safe load of 4,500 pounds
- Do not exceed rated capacity.
- Standard hot-line grips are not supplied with springs or lock-open features
- Always match proper size and type of grip to application.
- Klein offers a lifetime warranty on material defects and workmanship for the normal life of the product
- Grips are to be used for temporary installation, not for permanent anchorage.
- Round Inside-Jaw Contour
- Made in USA
Specifications
| Country of Origin | :Â Â | United States |
| Size Name | :Â Â | .31-Inch-.53-Inch |
| Application | :Â Â | Bare and Insulated Conductors |
| Cable Diameter | :Â Â | 0.1" to 0.53" (7.87 to 13.46 mm) |
| Jaw Length | :Â Â | 4.75" (12.1 cm) |
| Jaw Type | :Â Â | Round |
| Maximum Safe Load | :Â Â | 4500 lb (2041 kg) |
| Cable Type | :Â Â | Copper, ACSR, AAC |
| Type | :Â Â | Chicago Grip |
| Locking Handle | :Â Â | Yes |
| Hot Latch | :Â Â | Yes |
| Spring | :Â Â | Yes |
| Swing Latch | :Â Â | No |
| Weight | :Â Â | 4.0000 lbs |
- Chicago Grip-with Hot-Line Latch for Bare Conductors has round inside-jaw contour
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
- Jaw length: 4-7/8-Inch
- When used on/near energized lines, ground, insulate, or isolate grip before pulling.
- Maximum safe load of 4,500 pounds
- Do not exceed rated capacity.
- Standard hot-line grips are not supplied with springs or lock-open features
- Always match proper size and type of grip to application.
- Klein offers a lifetime warranty on material defects and workmanship for the normal life of the product
- Grips are to be used for temporary installation, not for permanent anchorage.
- Round Inside-Jaw Contour
- Made in USA
Specifications
Country of Origin :Â Â United States Size Name :Â Â .31-Inch-.53-Inch Application :Â Â Bare and Insulated Conductors Cable Diameter :Â Â 0.1" to 0.53" (7.87 to 13.46 mm) Jaw Length :Â Â 4.75" (12.1 cm) Jaw Type :Â Â Round Maximum Safe Load :Â Â 4500 lb (2041 kg) Cable Type :Â Â Copper, ACSR, AAC Type :Â Â Chicago Grip Locking Handle :Â Â Yes Hot Latch :Â Â Yes Spring :Â Â Yes Swing Latch :Â Â No Weight :Â Â 4.0000 lbs - Downloads
Spec Sheet
Video DownloadVideo Download
InstructionsGrip_Instructions.pdfGrip_Maintenance_Guide_139168ART.pdf