Conduit Locknut and Reaming Pliers
MFG #D333-8
Requires Quote
 / EACH
Product Description:
The Conduit Locknut and Reaming Pliers tighten up to 3/4-inch EMT and 1/2-inch rigid locknuts. The special jaw is designed for locknuts, conduit and caps. Serrated jaws deburr the outside while the nose reams and smooths the inside of conduit up to 3/4-inch EMT. The long-nose design makes it easier to reach into electrical boxes.
HESCO Part Number
KLED3338
UPC
092644712593
Manufacturer Part Number
D333-8
Manufacturer
Klein Tools
Conduit Locknut and Reaming Pliers
MFG #D333-8
Product Description:
The Conduit Locknut and Reaming Pliers tighten up to 3/4-inch EMT and 1/2-inch rigid locknuts. The special jaw is designed for locknuts, conduit and caps. Serrated jaws deburr the outside while the nose reams and smooths the inside of conduit up to 3/4-inch EMT. The long-nose design makes it easier to reach into electrical boxes.
HESCO Part Number
KLED3338
UPC
092644712593
Manufacturer Part Number
D333-8
Manufacturer
Klein Tools
Requires Quote
 / EACH
- Features
- Specifications
- Resources
- Always wear approved eye protection.
- Pliers tighten 1/2-Inch (13 mm) and 3/4-Inch (19 mm) EMT or 1/2-Inch (13 mm) rigid locknuts
- NOT insulated. Plastic-dipped or slip-on plastic handles are NOT intended for protection against electrical shock.
- Fits liquid tight fittings and caps
- Reams and deburrs both inside and outside of conduit
- Knurled jaws at nose tip pull wire or fish tape and machined nose fits snugly into locknut wings
- Forged in the USA with custom, US-made tool steel for maximum durability
- Pulls Flat Steel Fish Tape
Specifications
| Handle Finish | :Â Â | Plastic-Dipped |
| Type | :Â Â | Long Nose Pliers |
| Handle Color | :Â Â | Yellow |
| Insulated | :Â Â | No |
| Jaw Capacity | :Â Â | 3.5 cm (1.38 Inch) |
| Jaw Thickness | :Â Â | 0.5 Inch (1.3 cm) |
| Jaw Width | :Â Â | 2.4 cm (0.938 Inch) |
| Handle Length | :Â Â | 4.51 Inch (11.5 cm) |
| Jaw Length | :Â Â | 4.1 cm (1.625 Inch) |
| Overall Length | :Â Â | 19.7 cm (7.76 Inch) |
| Point Diameter | :Â Â | 0.9 cm (0.36 Inch) |
| Height | :Â Â | 0.5000 in |
| Width | :Â Â | 1.7500 in |
| Depth | :Â Â | 7.7500 in |
| Weight | :Â Â | 0.5500 lbs |
- Always wear approved eye protection.
- Pliers tighten 1/2-Inch (13 mm) and 3/4-Inch (19 mm) EMT or 1/2-Inch (13 mm) rigid locknuts
- NOT insulated. Plastic-dipped or slip-on plastic handles are NOT intended for protection against electrical shock.
- Fits liquid tight fittings and caps
- Reams and deburrs both inside and outside of conduit
- Knurled jaws at nose tip pull wire or fish tape and machined nose fits snugly into locknut wings
- Forged in the USA with custom, US-made tool steel for maximum durability
- Pulls Flat Steel Fish Tape
Specifications
Handle Finish :Â Â Plastic-Dipped Type :Â Â Long Nose Pliers Handle Color :Â Â Yellow Insulated :Â Â No Jaw Capacity :Â Â 3.5 cm (1.38 Inch) Jaw Thickness :Â Â 0.5 Inch (1.3 cm) Jaw Width :Â Â 2.4 cm (0.938 Inch) Handle Length :Â Â 4.51 Inch (11.5 cm) Jaw Length :Â Â 4.1 cm (1.625 Inch) Overall Length :Â Â 19.7 cm (7.76 Inch) Point Diameter :Â Â 0.9 cm (0.36 Inch) Height :Â Â 0.5000 in Width :Â Â 1.7500 in Depth :Â Â 7.7500 in Weight :Â Â 0.5500 lbs - Downloads
Spec Sheet
Video Download