Klein Tools
Cutting Crimping Pliers, Insulated, 9-Inch
MFG #D213-9NE-CR-INS
Product Description:
These Klein Tools 9-Inch Insulated Side-Cutting Crimping Pliers offer protection against electric shock up to 1000 volts. The pliers are individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol. The pliers offer maximum strength with their forged-steel construction and a crimping die helps provide increased leverage.
HESCO Part Number
KLED2139NECRINS
UPC
092644700477
Manufacturer Part Number
D213-9NE-CR-INS
Manufacturer
Klein Tools
Klein Tools
Cutting Crimping Pliers, Insulated, 9-Inch
MFG #D213-9NE-CR-INS
Product Description:
These Klein Tools 9-Inch Insulated Side-Cutting Crimping Pliers offer protection against electric shock up to 1000 volts. The pliers are individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol. The pliers offer maximum strength with their forged-steel construction and a crimping die helps provide increased leverage.
HESCO Part Number
KLED2139NECRINS
UPC
092644700477
Manufacturer Part Number
D213-9NE-CR-INS
Manufacturer
Klein Tools
- Features
- Specifications
- Resources
- Only use tools that are marked with the official international 1000-volt rating symbol shown above, if there is any chance that the tools will make contact with an energized source.
- Pliers are individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol
- Whenever possible, always de-energize lines and equipment prior to working on or around them. Klein insulated tools are designed only to reduce the chance of injury where the tool may make contact with an energized source.
- Two layers of insulation provide protection against electric shock while the integral guards help prevent hand contact with conductive parts
- Do NOT touch uninsulated portion of the tool or any conductive object when either might contact an energized source.
- Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool
- Wear approved eye protection. Always inspect your tools before use. Do not use if orange coating cracks, breaks or becomes damaged. Destroy tool if white layer shows through orange layer.
- A flame retardant, impact-resistant, bright orange outer coating
- Always inspect your tools before use. Destroy tool if insulation becomes damaged in any way.
- Made in USA
- Because moisture, films, or other surface contaminants are conductive, Klein insulated tools must be kept clean, dry, and free of any surface contaminants.
- High-leverage design provides 46-Percent greater cutting and gripping power than other plier designs
- Precision machined knives cut cleanly and crisply even on fine stranded wire, mule tape and pull line
- Integral guards help prevent hand contact with conductive parts
- Integral Guards Help Prevent Hand Contact With Conductive Parts
Specifications
| Handle Finish | :Â Â | 2-Layer Insulation |
| Jaw Length | :Â Â | 1.91" (4.9 cm) |
| Knife Length | :Â Â | 0.781" (2 cm) |
| Cut Style | :Â Â | Side-Cutting |
| Nose Type | :Â Â | New England |
| Jaw Capacity | :Â Â | 1.375" (3.5 cm) |
| Tether Capable | :Â Â | No |
| Overall Length | :Â Â | 9.68" (24.6 cm) |
| Cutting Knives | :Â Â | 1 |
| Handle Length | :Â Â | 5.73" (14.6 cm) |
| Insulated | :Â Â | Yes |
| Joint Type | :Â Â | Hot-Riveted |
| Material | :Â Â | Induction Hardened Steel |
| Jaw Thickness | :Â Â | 0.62" (1.6 cm) |
| Type | :Â Â | High-Leverage Connector Crimping Pliers |
| Application | :Â Â | ACSR, Screws, Nails and Most Hardened Wires, Crimps Non-insulated Connectors, Lugs, and Terminals |
| Jaw Width | :Â Â | 1.25" (3.2 cm) |
| Handle Color | :Â Â | Orange |
| Overall Width | :Â Â | 2.49" (6.3 cm) |
| Standards | :Â Â | IEC 60900 and ASTM F1505 |
| Strips and Cuts AWG Solid | :Â Â | No |
| Screw Shearing | :Â Â | No |
| Strips and Cuts AWG Stranded | :Â Â | No |
| Height | :Â Â | 0.6250 in |
| Width | :Â Â | 1.0000 in |
| Depth | :Â Â | 9.6250 in |
| Weight | :Â Â | 1.2500 lbs |
- Only use tools that are marked with the official international 1000-volt rating symbol shown above, if there is any chance that the tools will make contact with an energized source.
- Pliers are individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol
- Whenever possible, always de-energize lines and equipment prior to working on or around them. Klein insulated tools are designed only to reduce the chance of injury where the tool may make contact with an energized source.
- Two layers of insulation provide protection against electric shock while the integral guards help prevent hand contact with conductive parts
- Do NOT touch uninsulated portion of the tool or any conductive object when either might contact an energized source.
- Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool
- Wear approved eye protection. Always inspect your tools before use. Do not use if orange coating cracks, breaks or becomes damaged. Destroy tool if white layer shows through orange layer.
- A flame retardant, impact-resistant, bright orange outer coating
- Always inspect your tools before use. Destroy tool if insulation becomes damaged in any way.
- Made in USA
- Because moisture, films, or other surface contaminants are conductive, Klein insulated tools must be kept clean, dry, and free of any surface contaminants.
- High-leverage design provides 46-Percent greater cutting and gripping power than other plier designs
- Precision machined knives cut cleanly and crisply even on fine stranded wire, mule tape and pull line
- Integral guards help prevent hand contact with conductive parts
- Integral Guards Help Prevent Hand Contact With Conductive Parts
Specifications
Handle Finish :Â Â 2-Layer Insulation Jaw Length :Â Â 1.91" (4.9 cm) Knife Length :Â Â 0.781" (2 cm) Cut Style :Â Â Side-Cutting Nose Type :Â Â New England Jaw Capacity :Â Â 1.375" (3.5 cm) Tether Capable :Â Â No Overall Length :Â Â 9.68" (24.6 cm) Cutting Knives :Â Â 1 Handle Length :Â Â 5.73" (14.6 cm) Insulated :Â Â Yes Joint Type :Â Â Hot-Riveted Material :Â Â Induction Hardened Steel Jaw Thickness :Â Â 0.62" (1.6 cm) Type :Â Â High-Leverage Connector Crimping Pliers Application :Â Â ACSR, Screws, Nails and Most Hardened Wires, Crimps Non-insulated Connectors, Lugs, and Terminals Jaw Width :Â Â 1.25" (3.2 cm) Handle Color :Â Â Orange Overall Width :Â Â 2.49" (6.3 cm) Standards :Â Â IEC 60900 and ASTM F1505 Strips and Cuts AWG Solid :Â Â No Screw Shearing :Â Â No Strips and Cuts AWG Stranded :Â Â No Height :Â Â 0.6250 in Width :Â Â 1.0000 in Depth :Â Â 9.6250 in Weight :Â Â 1.2500 lbs - Downloads
Spec SheetInstructions