Wire Pulling Foam Lubricant
MFG #51100
Requires Quote
/ (Must order in increments of 6/E)
Product Description:
Klein Tools' Foam Wire Pulling Lubricant is a no mess, no hassle alternative to traditional wax/gel lubricants. The foam fills the conduit and coats the wires as they are pulled through. The lubricant stays where it is applied, even in vertical conduit. It also dissolves clean from hands, clothing and carpeting.
HESCO Part Number
KLE51100
UPC
092644511004
Manufacturer Part Number
51100
Manufacturer
Klein Tools
Wire Pulling Foam Lubricant
MFG #51100
Product Description:
Klein Tools' Foam Wire Pulling Lubricant is a no mess, no hassle alternative to traditional wax/gel lubricants. The foam fills the conduit and coats the wires as they are pulled through. The lubricant stays where it is applied, even in vertical conduit. It also dissolves clean from hands, clothing and carpeting.
HESCO Part Number
KLE51100
UPC
092644511004
Manufacturer Part Number
51100
Manufacturer
Klein Tools
Requires Quote
/ (Must order in increments of 6/E)
- Features
- Specifications
- Resources
- No mess formula stays where it is applied and wipes clean from hands and fabric
- DANGER - Extremely Flammable.
- 4X greater yield than gel or wax lubricants
- Keep out of reach of children.
- Coats better and is 30-percent more slippery than gel or wax lubricants
- Contents under pressure. Do not expose container to direct sunlight or temperatures above 120°F. Do not transport or store near heat sources. Keep cans dry and away from sources of ignition. If frozen, gradually warm to room temperature.
- One can equals four quarts of wax/gel lubricants. Based on jobsite pulls with foam in 3/4-Inch conduit when used as directed
- Do not use wet product on live circuits. Compound is electrically conductive before it dries.
- Made in USA
- For industrial and commercial use only.
- Coats Better and 30% More Slippery than Gel or Wax Lubricants
Specifications
| Type | : | Foam |
| Size | : | 19 oz (0.6 L) |
| Working Temperature | : | 40° F to 100° F (4° C to 38° C) |
| Container | : | Aerosol Can |
| Weight | : | 1.2 lb (0.5 kg) |
| Application | : | Wire Pulling |
| Height | : | 2.8000 in |
| Width | : | 2.8000 in |
| Depth | : | 10.2500 in |
| Weight | : | 1.1880 lbs |
- No mess formula stays where it is applied and wipes clean from hands and fabric
- DANGER - Extremely Flammable.
- 4X greater yield than gel or wax lubricants
- Keep out of reach of children.
- Coats better and is 30-percent more slippery than gel or wax lubricants
- Contents under pressure. Do not expose container to direct sunlight or temperatures above 120°F. Do not transport or store near heat sources. Keep cans dry and away from sources of ignition. If frozen, gradually warm to room temperature.
- One can equals four quarts of wax/gel lubricants. Based on jobsite pulls with foam in 3/4-Inch conduit when used as directed
- Do not use wet product on live circuits. Compound is electrically conductive before it dries.
- Made in USA
- For industrial and commercial use only.
- Coats Better and 30% More Slippery than Gel or Wax Lubricants
Specifications
Type : Foam Size : 19 oz (0.6 L) Working Temperature : 40° F to 100° F (4° C to 38° C) Container : Aerosol Can Weight : 1.2 lb (0.5 kg) Application : Wire Pulling Height : 2.8000 in Width : 2.8000 in Depth : 10.2500 in Weight : 1.1880 lbs - Downloads
Spec SheetMSDS