Allen-Bradley
Operating Lever, Fork Roller Lever, Non-Adjustable, 1.5 In, Both Rollers On Front, Nylon, 0.75 In, 0.28 In
MFG #802T-W4A
$46.70 / E
Each
Each
Product Description:
802T Limit Switch Levers, Fork Roller Lever, 1.5 in. Lever Length, Nylon Roller, 0.75 in. Roller Diameter, 0.28 in. Roller Width
HESCO Part Number
AB802TW4A
UPC
781180826146
Manufacturer Part Number
802T-W4A
Manufacturer
Allen-Bradley
Allen-Bradley
Operating Lever, Fork Roller Lever, Non-Adjustable, 1.5 In, Both Rollers On Front, Nylon, 0.75 In, 0.28 In
MFG #802T-W4A
Product Description:
802T Limit Switch Levers, Fork Roller Lever, 1.5 in. Lever Length, Nylon Roller, 0.75 in. Roller Diameter, 0.28 in. Roller Width
HESCO Part Number
AB802TW4A
UPC
781180826146
Manufacturer Part Number
802T-W4A
Manufacturer
Allen-Bradley
$46.70 / E
Each
Each
- Features
- Specifications
- Programmable travel to reset (hysteresis)
- Direct opening action
- Autobaud
- Operating heads are mountable in four positions, 90° apart
- Alternative to oversized power contacts
- Teach and learn angle
- High contact reliability in contaminated atmospheres
- Connect directly to PLC input
- Long life and reliability
- Multiple operator styles available:
- Submersible
- Alternative to glass-enclosed reed switches or solid state devices
- Dual outputs with distinct programmable angles to operate
- Multiple operator styles
- Optimized for low energy use
- Direct connection to DeviceNet® network
- Rugged metal construction
- Plug-in design
- Class I, Groups B, C, and D or Class II, Groups E, F and G
- Suitable for machine connectivity and low-voltage circuits
- NEMA 6P/IP67 sealing
- Snap acting contacts
- Pre-wired and factory sealed
- Proven reliability
- Front mount for simplified mounting
- Rugged construction
- Configurable counters with resets on each output
- Class I, groups B, C and D or Class II, groups E, F and G or Class III
- NEMA Enclosure Type 13
- NEMA Type 4 watertight construction
- Each output programmable to N.O. or N.C.
- Corrosion resistant
- Meets requirement for NEMA 1, 4X, 6P and 15 enclosures
Operating Lever Data
Lever Type | : | Fork Roller Lever |
Adjustable or Non-Adjustable | : | Non-Adjustable |
Radius | : | 1.5 In |
Roller Material | : | Nylon |
Roller Diameter | : | 0.75 In |
Roller Width | : | 0.28 In |
Roller Position | : | Both Rollers On Front |
Additional Information | ||
Message | : | Operating Lever 802T-W3F Should Not Be Used With 802M-NPY5 or 802M-ASY5 Switches. |
Message | : | Do Not Use 802T-W7, 802T-W7A, 802T-W7B On Maintained Contact Limit Switches. |
- Programmable travel to reset (hysteresis)
- Direct opening action
- Autobaud
- Operating heads are mountable in four positions, 90° apart
- Alternative to oversized power contacts
- Teach and learn angle
- High contact reliability in contaminated atmospheres
- Connect directly to PLC input
- Long life and reliability
- Multiple operator styles available:
- Submersible
- Alternative to glass-enclosed reed switches or solid state devices
- Dual outputs with distinct programmable angles to operate
- Multiple operator styles
- Optimized for low energy use
- Direct connection to DeviceNet® network
- Rugged metal construction
- Plug-in design
- Class I, Groups B, C, and D or Class II, Groups E, F and G
- Suitable for machine connectivity and low-voltage circuits
- NEMA 6P/IP67 sealing
- Snap acting contacts
- Pre-wired and factory sealed
- Proven reliability
- Front mount for simplified mounting
- Rugged construction
- Configurable counters with resets on each output
- Class I, groups B, C and D or Class II, groups E, F and G or Class III
- NEMA Enclosure Type 13
- NEMA Type 4 watertight construction
- Each output programmable to N.O. or N.C.
- Corrosion resistant
- Meets requirement for NEMA 1, 4X, 6P and 15 enclosures
Operating Lever Data
Lever Type : Fork Roller Lever Adjustable or Non-Adjustable : Non-Adjustable Radius : 1.5 In Roller Material : Nylon Roller Diameter : 0.75 In Roller Width : 0.28 In Roller Position : Both Rollers On Front Additional Information
Message : Operating Lever 802T-W3F Should Not Be Used With 802M-NPY5 or 802M-ASY5 Switches. Message : Do Not Use 802T-W7, 802T-W7A, 802T-W7B On Maintained Contact Limit Switches.