Allen-Bradley
Operating Lever, Fork Roller Lever, Non-Adjustable, 1.5 In, Both Rollers On Front, Nylon, 0.75 In, 1.0 In
MFG #802T-W4F
$71.69 / E
Each
Each
Product Description:
802T Limit Switch Levers, Fork Roller Lever, 1.5 in. Lever Length, Nylon Roller, 0.75 in. Roller Diameter, 1 in. Roller Width
HESCO Part Number
AB802TW4F
UPC
781180203169
Manufacturer Part Number
802T-W4F
Manufacturer
Allen-Bradley
Allen-Bradley
Operating Lever, Fork Roller Lever, Non-Adjustable, 1.5 In, Both Rollers On Front, Nylon, 0.75 In, 1.0 In
MFG #802T-W4F
Product Description:
802T Limit Switch Levers, Fork Roller Lever, 1.5 in. Lever Length, Nylon Roller, 0.75 in. Roller Diameter, 1 in. Roller Width
HESCO Part Number
AB802TW4F
UPC
781180203169
Manufacturer Part Number
802T-W4F
Manufacturer
Allen-Bradley
$71.69 / E
Each
Each
- Features
- Specifications
- Suitable for machine connectivity and low-voltage circuits
- High contact reliability in contaminated atmospheres
- Plug-in design
- Rugged construction
- Snap acting contacts
- Rugged metal construction
- Each output programmable to N.O. or N.C.
- Dual outputs with distinct programmable angles to operate
- Configurable counters with resets on each output
- Autobaud
- Teach and learn angle
- Meets requirement for NEMA 1, 4X, 6P and 15 enclosures
- NEMA 6P/IP67 sealing
- Direct opening action
- Direct connection to DeviceNet® network
- Multiple operator styles available:
- NEMA Enclosure Type 13
- Programmable travel to reset (hysteresis)
- Class I, groups B, C and D or Class II, groups E, F and G or Class III
- Class I, Groups B, C, and D or Class II, Groups E, F and G
- Pre-wired and factory sealed
- Optimized for low energy use
- NEMA Type 4 watertight construction
- Multiple operator styles
- Proven reliability
- Front mount for simplified mounting
- Corrosion resistant
- Alternative to oversized power contacts
- Long life and reliability
- Alternative to glass-enclosed reed switches or solid state devices
- Connect directly to PLC input
- Submersible
- Operating heads are mountable in four positions, 90° apart
Operating Lever Data
| Lever Type | : | Fork Roller Lever |
| Adjustable or Non-Adjustable | : | Non-Adjustable |
| Radius | : | 1.5 In |
| Roller Material | : | Nylon |
| Roller Diameter | : | 0.75 In |
| Roller Width | : | 1.0 In |
| Roller Position | : | Both Rollers On Front |
Additional Information | ||
| Message | : | Operating Lever 802T-W3F Should Not Be Used With 802M-NPY5 or 802M-ASY5 Switches. |
| Message | : | Do Not Use 802T-W7, 802T-W7A, 802T-W7B On Maintained Contact Limit Switches. |
- Suitable for machine connectivity and low-voltage circuits
- High contact reliability in contaminated atmospheres
- Plug-in design
- Rugged construction
- Snap acting contacts
- Rugged metal construction
- Each output programmable to N.O. or N.C.
- Dual outputs with distinct programmable angles to operate
- Configurable counters with resets on each output
- Autobaud
- Teach and learn angle
- Meets requirement for NEMA 1, 4X, 6P and 15 enclosures
- NEMA 6P/IP67 sealing
- Direct opening action
- Direct connection to DeviceNet® network
- Multiple operator styles available:
- NEMA Enclosure Type 13
- Programmable travel to reset (hysteresis)
- Class I, groups B, C and D or Class II, groups E, F and G or Class III
- Class I, Groups B, C, and D or Class II, Groups E, F and G
- Pre-wired and factory sealed
- Optimized for low energy use
- NEMA Type 4 watertight construction
- Multiple operator styles
- Proven reliability
- Front mount for simplified mounting
- Corrosion resistant
- Alternative to oversized power contacts
- Long life and reliability
- Alternative to glass-enclosed reed switches or solid state devices
- Connect directly to PLC input
- Submersible
- Operating heads are mountable in four positions, 90° apart
Operating Lever Data
Lever Type : Fork Roller Lever Adjustable or Non-Adjustable : Non-Adjustable Radius : 1.5 In Roller Material : Nylon Roller Diameter : 0.75 In Roller Width : 1.0 In Roller Position : Both Rollers On Front Additional Information
Message : Operating Lever 802T-W3F Should Not Be Used With 802M-NPY5 or 802M-ASY5 Switches. Message : Do Not Use 802T-W7, 802T-W7A, 802T-W7B On Maintained Contact Limit Switches.