Glass Filled Nylon Drain, ½" NPT - Ex e Class I Div. 2 IP66/4X
MFG #KDEGF0050
$266.00 / E
Each
Each
Product Description:
Glass Filled Nylon Drain, ½" NPT - Ex e Class I Div. 2 IP66/4X
HESCO Part Number
KILKDEGF0050
UPC
783936121604
Manufacturer Part Number
KDEGF0050
Manufacturer
Killark
Glass Filled Nylon Drain, ½" NPT - Ex e Class I Div. 2 IP66/4X
MFG #KDEGF0050
Product Description:
Glass Filled Nylon Drain, ½" NPT - Ex e Class I Div. 2 IP66/4X
HESCO Part Number
KILKDEGF0050
UPC
783936121604
Manufacturer Part Number
KDEGF0050
Manufacturer
Killark
$266.00 / E
Each
Each
- Features
- Specifications
- Resources
- Silicone O-ring supplied as standard and suitable for use in a -55°C to +80°C temperature range
- 30% glass filled nylon
- Internal 316 stainless steel locknut supplied as standard
- When tightened to the proper torque the joint makes a hose down tight seal for type 4, 4X & IP66 application
- The KDE drain and breather are installed either the bottom top of an enclosure. When installed in the bottom they act as a gravity fed drain to expel moisture from condensation that can build up in electrical enclosures. When installed in the top of an enclosure it acts as a breather allowing air to enter and prevent a vacuum which can cause the drain not to flow properly. They are cCSAus certified for Class I Div. 2 Groups ABCD, Class I Zone 1 & 2 IIC, Class II Groups EFG, Class III, Type 4 & 4X. Also, ATEX, IEC Ex & Inmetro, Ex e IIC, Ex tb IIIC IP66. The KDE are offered in aluminum, 304 series stainless steel, 30% glass filled nylon and 316 stainless steel. Supplied standard with a high temp silicone O-Ring and 316 stainless steel castellated lock nut. Thread sizes 1/2” & ¾” NPT and Metric size M20 & M25.
Specifications
| Buy American Compliant | : | Contact Manufacturer |
| Country of Origin | : | PR |
| Hazardous Rating(s) | : | Class I, Divisions 2, Groups A, B, C, D;Class I, Zones 1 & 2;Class II, Divisions 1 & 2, Groups E, F, G;Class III, Divisions 1 & 2 |
| Hub Size | : | 1/2" |
| Operating Temperature Celcius Max | : | 80 |
| Operating Temperature Celcius Min | : | -55 °C |
| Operating Temperature Range Celcius | : | -55°C to 80°C |
| Application | : | When installed in the bottom of a thin wall enclosure the KDE allows water from condensation to drain continuously out of the enclosure. The drain breathers are installed through clearance holes and held secured with a internal locknut. The silicone external o ring makes a hose down tight seal. |
| Nema Rating | : | 3, 4, 4X |
| Type | : | Drain & Breather |
| ARRA Compliant | : | Contact Manufacturer |
| Class Code | : | D30 |
| Description - Invoice | : | 1/2 NPT Exe CID2 GFN DRAIN IP66/4X |
| Freight Class Code | : | 06316011 |
| Harmonization Code | : | 3926909989 |
| Image Actual Or Representative | : | R |
| MSDS Flag | : | No |
| Sub Class Code | : | D30D237 |
| CSA File Number | : | 2715851 |
| Material | : | Glass Filled Nylon |
| Series | : | KDE |
| Base Unit of Measure | : | EA |
| BOX SIZE | : | 0.000x0.000x0.000 (in) |
| Carton - Gross Weight per Pack | : | 0.500 lb. |
| Carton - Number of Sub Packs | : | 5 |
| Carton - Pack Description | : | Carton |
| Carton - SCC-14 Next Lower Level Sub Pack | : | 00783936121604 |
| Carton - Total Units | : | 5 |
Certifications | ||
| EU RoHS Indicator | : | Contact Manufacturer |
- Silicone O-ring supplied as standard and suitable for use in a -55°C to +80°C temperature range
- 30% glass filled nylon
- Internal 316 stainless steel locknut supplied as standard
- When tightened to the proper torque the joint makes a hose down tight seal for type 4, 4X & IP66 application
- The KDE drain and breather are installed either the bottom top of an enclosure. When installed in the bottom they act as a gravity fed drain to expel moisture from condensation that can build up in electrical enclosures. When installed in the top of an enclosure it acts as a breather allowing air to enter and prevent a vacuum which can cause the drain not to flow properly. They are cCSAus certified for Class I Div. 2 Groups ABCD, Class I Zone 1 & 2 IIC, Class II Groups EFG, Class III, Type 4 & 4X. Also, ATEX, IEC Ex & Inmetro, Ex e IIC, Ex tb IIIC IP66. The KDE are offered in aluminum, 304 series stainless steel, 30% glass filled nylon and 316 stainless steel. Supplied standard with a high temp silicone O-Ring and 316 stainless steel castellated lock nut. Thread sizes 1/2” & ¾” NPT and Metric size M20 & M25.
Specifications
Buy American Compliant : Contact Manufacturer Country of Origin : PR Hazardous Rating(s) : Class I, Divisions 2, Groups A, B, C, D;Class I, Zones 1 & 2;Class II, Divisions 1 & 2, Groups E, F, G;Class III, Divisions 1 & 2 Hub Size : 1/2" Operating Temperature Celcius Max : 80 Operating Temperature Celcius Min : -55 °C Operating Temperature Range Celcius : -55°C to 80°C Application : When installed in the bottom of a thin wall enclosure the KDE allows water from condensation to drain continuously out of the enclosure. The drain breathers are installed through clearance holes and held secured with a internal locknut. The silicone external o ring makes a hose down tight seal. Nema Rating : 3, 4, 4X Type : Drain & Breather ARRA Compliant : Contact Manufacturer Class Code : D30 Description - Invoice : 1/2 NPT Exe CID2 GFN DRAIN IP66/4X Freight Class Code : 06316011 Harmonization Code : 3926909989 Image Actual Or Representative : R MSDS Flag : No Sub Class Code : D30D237 CSA File Number : 2715851 Material : Glass Filled Nylon Series : KDE Base Unit of Measure : EA BOX SIZE : 0.000x0.000x0.000 (in) Carton - Gross Weight per Pack : 0.500 lb. Carton - Number of Sub Packs : 5 Carton - Pack Description : Carton Carton - SCC-14 Next Lower Level Sub Pack : 00783936121604 Carton - Total Units : 5 Certifications
EU RoHS Indicator : Contact Manufacturer - Downloads
Spec Sheet
STEP 3D Model Asset ReferenceCertification Document Asset Reference 1Certification Document Asset Reference 2Certification Document Asset Reference 3Customer Notices Asset ReferenceInstallation Manuals Asset ReferenceSpecification Sheet Asset Reference