EtherNet/IP to Reliance AutoMax Gateway
MFG #AN-X-AMX
$3,394.79Â /Â E
EACH
EACH
Product Description:
The AN-X-AMX Gateway provides a migration path for users looking to upgrade Reliance AutoMax DCS or Remote I/O networks. The AMX gateway has multiple operating modes, these operating modes are all included with the AN-X-AMX and are selected during initial module configuration. The operating modes include DCSNet2, a bridge between EtherNet/IP and a DCSNet network; DCSLOG, for logging DCSNet traffic; AMXRIO, a bridge between EtherNet/IP and AutoMax Remote I/O; and AMXCapt, a Remote I/O or DCSNet data capture tool.
HESCO Part Number
PROANXAMX
Manufacturer Part Number
AN-X-AMX
Manufacturer
Prosoft Technology
EtherNet/IP to Reliance AutoMax Gateway
MFG #AN-X-AMX
Product Description:
The AN-X-AMX Gateway provides a migration path for users looking to upgrade Reliance AutoMax DCS or Remote I/O networks. The AMX gateway has multiple operating modes, these operating modes are all included with the AN-X-AMX and are selected during initial module configuration. The operating modes include DCSNet2, a bridge between EtherNet/IP and a DCSNet network; DCSLOG, for logging DCSNet traffic; AMXRIO, a bridge between EtherNet/IP and AutoMax Remote I/O; and AMXCapt, a Remote I/O or DCSNet data capture tool.
HESCO Part Number
PROANXAMX
Manufacturer Part Number
AN-X-AMX
Manufacturer
Prosoft Technology
$3,394.79Â /Â E
EACH
EACH
- Features
- Resources
- In the DCSNet2 operating mode, the gateway acts as a bridge between Ethernet/IP and a Reliance AutoMax DCSNet network. The AN-X removes the hardware dependence on specific AutoMax interface cards (ISA, PCI, PC Card) allowing any computer or PAC with Ethernet/IP to connect to a DCSNet network.
- DCSNet Master or Slave
- Supports Reliance AutoMax programming software
- Supports up to 15 scheduled connections to a ControlLogix processor, DCSNet2
- Supports EtherNet/IP HMIs to AutoMax controllers
- In the AMXRIO operating mode, a PC or PAC on Ethernet /IP can connect to a Reliance AutoMax Remote I/O network. The module acts as a master on the AutoMax remote I/O network.
- Scan up to 7 slave drops
- Supports up to 248 words of scheduled output data and up to 250 words of scheduled input data
- Scans AutoMax remote I/O racks and heads
- Maintains diagnostic counters
- In the DCSLOG operating mode, the gateway connects to the AutoMax DCSNet network, listens to every value of each DCSNet register, looks for changes and then timestamps the values.
- Data logging with millisecond time stamps
- Does not occupy a drop on the network or affect existing network traffic
- In the AMXCAPT operating mode, data can be captured, stored and then analyzed on a Reliance AutoMax DCS or Remote I/O network. Examine the behavior of all drops, verify network data and timing, locate network errors and troubleshoot problems with the network and with the process.
- All network frames are captured and stored, with timestamps to microsecond precision
- Post-capture filtering process to select frames of interest for further analysis
- Typical capture file size is 2.5 mb/minute, 150 mb/hour, 3.6 gb /day
- In the DCSNet2 operating mode, the gateway acts as a bridge between Ethernet/IP and a Reliance AutoMax DCSNet network. The AN-X removes the hardware dependence on specific AutoMax interface cards (ISA, PCI, PC Card) allowing any computer or PAC with Ethernet/IP to connect to a DCSNet network.
- DCSNet Master or Slave
- Supports Reliance AutoMax programming software
- Supports up to 15 scheduled connections to a ControlLogix processor, DCSNet2
- Supports EtherNet/IP HMIs to AutoMax controllers
- In the AMXRIO operating mode, a PC or PAC on Ethernet /IP can connect to a Reliance AutoMax Remote I/O network. The module acts as a master on the AutoMax remote I/O network.
- Scan up to 7 slave drops
- Supports up to 248 words of scheduled output data and up to 250 words of scheduled input data
- Scans AutoMax remote I/O racks and heads
- Maintains diagnostic counters
- In the DCSLOG operating mode, the gateway connects to the AutoMax DCSNet network, listens to every value of each DCSNet register, looks for changes and then timestamps the values.
- Data logging with millisecond time stamps
- Does not occupy a drop on the network or affect existing network traffic
- In the AMXCAPT operating mode, data can be captured, stored and then analyzed on a Reliance AutoMax DCS or Remote I/O network. Examine the behavior of all drops, verify network data and timing, locate network errors and troubleshoot problems with the network and with the process.
- All network frames are captured and stored, with timestamps to microsecond precision
- Post-capture filtering process to select frames of interest for further analysis
- Typical capture file size is 2.5 mb/minute, 150 mb/hour, 3.6 gb /day
- Downloads
AN-X-AMX DatasheetAN-X-DCSLOG User ManualAN-X-AMXCAPT User ManualAN-X-AMX AutoMax Remote IO User ManualAN-X-DCSNet2 Communication Module User Manual
AN-X-AMX-RIO filesAN-X-AMX Capture Mode FilesAN-X-AMX DCSNet FilesAN-X-AMX Virtual Device Driver