Prosoft Technology
EtherNet/IP™ to PROFINET Gateway for dual subnets
MFG #PLX32-EIP-PND
$1,436.11 / E
EACH
EACH
Product Description:
The EtherNet/IP to PROFINET device gateway offers bi-directional data transfers between a PROFINET Controller and EtherNet/IP networks. The PLX32-EIP-PND gateway is a stand-alone DIN-rail mounted unit that provides two Ethernet ports, with each port using a different subnet. The onboard SD Card slot (SD card optional) is used for storing configuration files that can be used for recovery, transferring the configuration to another gateway, or general configuration backup. The EtherNet/IP Driver uses Class 1 I/O connections or Class 3 Message instructions. The PROFINET driver operates as a PROFINET Class A device.
HESCO Part Number
PROPLX32EIPPND
Manufacturer Part Number
PLX32-EIP-PND
Manufacturer
Prosoft Technology
Prosoft Technology
EtherNet/IP™ to PROFINET Gateway for dual subnets
MFG #PLX32-EIP-PND
Product Description:
The EtherNet/IP to PROFINET device gateway offers bi-directional data transfers between a PROFINET Controller and EtherNet/IP networks. The PLX32-EIP-PND gateway is a stand-alone DIN-rail mounted unit that provides two Ethernet ports, with each port using a different subnet. The onboard SD Card slot (SD card optional) is used for storing configuration files that can be used for recovery, transferring the configuration to another gateway, or general configuration backup. The EtherNet/IP Driver uses Class 1 I/O connections or Class 3 Message instructions. The PROFINET driver operates as a PROFINET Class A device.
HESCO Part Number
PROPLX32EIPPND
Manufacturer Part Number
PLX32-EIP-PND
Manufacturer
Prosoft Technology
$1,436.11 / E
EACH
EACH
- Features
- Specifications
- Resources
- ODVA Approved
- PROFINET v2 certification with PROFINET Class A compliance
- EtherNet/IP and PROFINET certifications ensure the device is compatible with their respective network
- Field-tested with multiple PROFINET controllers from multiple vendors
- Remotely view and diagnose EtherNet/IP and PROFINET networks
- Embedded EDS AOP provided to allow for seamless integration to Studio 5000 and RSLogix 5000
- Using EtherNet/IP I/O connections, no ladder programming is required
- Multiple I/O connections to allow for increased throughput
Environmental
| Power Supply | : | 24 VDC nominal |
| Power Supply | : | 10 to 36 VDC allowed |
| Power Supply | : | Positive, Negative, GND Terminals |
| Current Load | : | 24 VDC nominal @ 300 mA |
| Current Load | : | 10 to 36 VDC @ 610 mA maximum |
| Operating Temperature | : | -25°C to 70°C (-13°F to 158°F) |
| Storage Temperature | : | -40°C to 80°C (-40°F to 176°F) |
| Relative Humidity | : | 5% to 95% RH with no condensation |
| Shock | : | IEC 60068-2-27; 15G @ 11ms, 3-Axis (Operational) |
| Shock | : | IEC 60068-2-27; 30G @ 18ms, 3-Axis (Non-Operation) |
| Vibration | : | IEC 60068-2-6; 5G @ 10Hz to 150Hz |
| Dimensions (H x W x D) | : | 5.38 x 1.99 x 4.38 in 13.67 x 5.05 x 11.13 cm |
| Ethernet Ports (2) | : | 10/100Mbit RJ45 Connector Electrical Isolation 1500 Vrms at 50 Hz to 60 Hz for 60 seconds, applied as specified in section 5.3.2 of IEC 60950: 1991 |
| Ethernet Ports (2) | : | Ethernet Broadcast Storm Resiliency = less than or equal to 5000 [ARP] frames-per-second and less than or equal to 5 minutes duration |
| Shipped With Each Unit | : | 2.5 mm screwdriver |
| Shipped With Each Unit | : | ProSoft Solutions DVD |
| Shipped With Each Unit | : | J180 Power Connector |
| Shipped With Each Unit | : | 5’ straight-through Ethernet cable |
EtherNet/IP Specifications | ||
| Number of Class 3 Server Connections | : | 5 |
| Supported PLC Types | : | PLC2, PLC5, SLC, CLX, CMPLX, MICROLX |
| Supported Message Types | : | PCCC and CIP |
| Class 3 Client Connections | : | Connected - 2 |
| Class 3 Client Connections | : | Unconnected - 1 |
| Number of Class 1 I/O Connections | : | 8 |
| I/O connection sizes in/out | : | 496/496 bytes |
| Max RPI time | : | 5 ms per connection |
| CIP Services Supported | : | 0x4C - CIP Data Table Read |
| CIP Services Supported | : | 0x4D - CIP Data Table Write |
| Command List | : | Support for 100 commands per Client, each configurable for command type, IP address, register to/from addressing and word/bit count. |
| Command Sets | : | PLC-2/PLC-3/PLC5 Basic Command Set |
| Command Sets | : | PLC5 Binary Command Set |
| Command Sets | : | PLC5 ASCII Command Set |
| Command Sets | : | SLC500 Command Set |
PROFINET Specifications | ||
| Driver Type | : | Class A Device |
| PROFINET I/O Data | : | 1440 bytes IN, 1440 bytes OUT |
| Exchange Types | : | Cyclic Real-time (RT) and Acyclic Data |
- ODVA Approved
- PROFINET v2 certification with PROFINET Class A compliance
- EtherNet/IP and PROFINET certifications ensure the device is compatible with their respective network
- Field-tested with multiple PROFINET controllers from multiple vendors
- Remotely view and diagnose EtherNet/IP and PROFINET networks
- Embedded EDS AOP provided to allow for seamless integration to Studio 5000 and RSLogix 5000
- Using EtherNet/IP I/O connections, no ladder programming is required
- Multiple I/O connections to allow for increased throughput
Environmental
Power Supply : 24 VDC nominal Power Supply : 10 to 36 VDC allowed Power Supply : Positive, Negative, GND Terminals Current Load : 24 VDC nominal @ 300 mA Current Load : 10 to 36 VDC @ 610 mA maximum Operating Temperature : -25°C to 70°C (-13°F to 158°F) Storage Temperature : -40°C to 80°C (-40°F to 176°F) Relative Humidity : 5% to 95% RH with no condensation Shock : IEC 60068-2-27; 15G @ 11ms, 3-Axis (Operational) Shock : IEC 60068-2-27; 30G @ 18ms, 3-Axis (Non-Operation) Vibration : IEC 60068-2-6; 5G @ 10Hz to 150Hz Dimensions (H x W x D) : 5.38 x 1.99 x 4.38 in 13.67 x 5.05 x 11.13 cm Ethernet Ports (2) : 10/100Mbit RJ45 Connector Electrical Isolation 1500 Vrms at 50 Hz to 60 Hz for 60 seconds, applied as specified in section 5.3.2 of IEC 60950: 1991 Ethernet Ports (2) : Ethernet Broadcast Storm Resiliency = less than or equal to 5000 [ARP] frames-per-second and less than or equal to 5 minutes duration Shipped With Each Unit : 2.5 mm screwdriver Shipped With Each Unit : ProSoft Solutions DVD Shipped With Each Unit : J180 Power Connector Shipped With Each Unit : 5’ straight-through Ethernet cable EtherNet/IP Specifications
Number of Class 3 Server Connections : 5 Supported PLC Types : PLC2, PLC5, SLC, CLX, CMPLX, MICROLX Supported Message Types : PCCC and CIP Class 3 Client Connections : Connected - 2 Class 3 Client Connections : Unconnected - 1 Number of Class 1 I/O Connections : 8 I/O connection sizes in/out : 496/496 bytes Max RPI time : 5 ms per connection CIP Services Supported : 0x4C - CIP Data Table Read CIP Services Supported : 0x4D - CIP Data Table Write Command List : Support for 100 commands per Client, each configurable for command type, IP address, register to/from addressing and word/bit count. Command Sets : PLC-2/PLC-3/PLC5 Basic Command Set Command Sets : PLC5 Binary Command Set Command Sets : PLC5 ASCII Command Set Command Sets : SLC500 Command Set PROFINET Specifications
Driver Type : Class A Device PROFINET I/O Data : 1440 bytes IN, 1440 bytes OUT Exchange Types : Cyclic Real-time (RT) and Acyclic Data - Downloads
PLX32-EIP-PND DatasheetPLX3x User ManualPLX30 Gateway Family FAQ
PLX3x EDS Files 1.2PLX32-EIP-PND GSD File