Thomas & Betts
Form 7 Conduit Body
MFG #LL107
$1,463.85Â /Â E
EACH
EACH
Product Description:
4 Inch Form 7, LL Conduit Body, Body Material Gray Iron with Zinc Plating and Baked On Epoxy Powder Coat with BlueKote Internal Coating for Use with Rigid/IMC Conduit
HESCO Part Number
TBLL107
UPC
78621093351
Manufacturer Part Number
LL107
Manufacturer
Thomas & Betts
Thomas & Betts
Form 7 Conduit Body
MFG #LL107
Product Description:
4 Inch Form 7, LL Conduit Body, Body Material Gray Iron with Zinc Plating and Baked On Epoxy Powder Coat with BlueKote Internal Coating for Use with Rigid/IMC Conduit
HESCO Part Number
TBLL107
UPC
78621093351
Manufacturer Part Number
LL107
Manufacturer
Thomas & Betts
$1,463.85Â /Â E
EACH
EACH
- Features
- Specifications
- Resources
- Eliminates rough internal surfaces that can cut into cable jacket, insulation and conductors during pulling and also reduces installation time and risk of installer strain.
- Triple-layer protection...including two layers of epoxy coating which stops corrosion in its tracks.
- Bodies are designed with a flat back, allowing more cubic inch capacity.
- T&B Form 7 bodies and covers are interchangeable with Crouse-Hinds and Appleton's Form 7 bodies and covers.
- Conduit bodies make 90 degree bends in conduit runs, act as mounting outlets for wiring devices and lighting fixtures and to provide access to conductors for maintenance and future system changes.
North American Specifications (UNSPSC)
| UNSPSC | :Â Â | 39131708 Electrical conduit fitting body |
| IGCC | :Â Â | 5563 Electrical conduit fitting body |
| Brand Name | :Â Â | T&B |
| Type | :Â Â | Form 7 Conduit Body |
| Special Features | :Â Â | BlueKote Teflon Based Internal Finish Provides a Slick, Easy-Glide Internal Surface Which Significantly Lowers the Amount of Force Necessary to Pull Wires. |
| Application | :Â Â | Conduit Bodies are Installed In Conduit Systems to Connect Sections, Act As Pull Outlets When Conductors are Being Installed and Provide Easy Access for Splices In Branch Conductors. |
| Standard | :Â Â | UL E2969, CSA |
| Hub Size | :Â Â | 4 Inch |
| Form | :Â Â | 7 |
| Material | :Â Â | Gray Iron |
| Finish | :Â Â | Zinc Plated with Epoxy Powder Coat |
Packaging | ||
| Outer Quantity | :Â Â | 1 |
| Outer Dimensions (inches) | :Â Â | 16.37x9.5x5.43 |
| Weight Uom | :Â Â | 12 lbs. per 100 |
- Eliminates rough internal surfaces that can cut into cable jacket, insulation and conductors during pulling and also reduces installation time and risk of installer strain.
- Triple-layer protection...including two layers of epoxy coating which stops corrosion in its tracks.
- Bodies are designed with a flat back, allowing more cubic inch capacity.
- T&B Form 7 bodies and covers are interchangeable with Crouse-Hinds and Appleton's Form 7 bodies and covers.
- Conduit bodies make 90 degree bends in conduit runs, act as mounting outlets for wiring devices and lighting fixtures and to provide access to conductors for maintenance and future system changes.
North American Specifications (UNSPSC)
UNSPSC :Â Â 39131708 Electrical conduit fitting body IGCC :Â Â 5563 Electrical conduit fitting body Brand Name :Â Â T&B Type :Â Â Form 7 Conduit Body Special Features :Â Â BlueKote Teflon Based Internal Finish Provides a Slick, Easy-Glide Internal Surface Which Significantly Lowers the Amount of Force Necessary to Pull Wires. Application :Â Â Conduit Bodies are Installed In Conduit Systems to Connect Sections, Act As Pull Outlets When Conductors are Being Installed and Provide Easy Access for Splices In Branch Conductors. Standard :Â Â UL E2969, CSA Hub Size :Â Â 4 Inch Form :Â Â 7 Material :Â Â Gray Iron Finish :Â Â Zinc Plated with Epoxy Powder Coat Packaging
Outer Quantity :Â Â 1 Outer Dimensions (inches) :Â Â 16.37x9.5x5.43 Weight Uom :Â Â 12 lbs. per 100 - Downloads
Technical Drawing / Spec Sheet USSpec Sheet